Troubleshooting Guide For HP Officejet 6600 Printer

Having troubles with your HP Officejet 6600 printer? Then, you are on the right page. We are here to help you with your HP Officejet 6600’s issues. In this article, we have mentioned the HP Officejet 6600 troubleshooting guide so that you can resolve the network connectivity problem with your printer anytime.

 

Points To Remember:

Before getting into the blog, keep these few points in mind;

  • This blog explains how to establish a connection with a network, manually.
  • This does not apply to printers with a USB connection
  • Due to the manual IP address connection, the printer does not go offline unnecessarily.
  • If your printer has a USB connection, you can choose to ignore this blog.

 

HP Officejet 6600 troubleshooting

Steps For Troubleshooting the Network Connection Issue:

 The below-mentioned steps will help you to resolve the network connection problem with your HP Officejet 6600 printer. By establishing a manual connection you can prevent your printer from going offline without any reason. For that, follow the steps below carefully;

  1. Firstly, click on the network settings or network setup menu.
  2. Then, try to print a network configuration report or the wireless test report from your printer.
  3. After that, verify the network status for your available network connection.
  4. Check the network type on the printout of the report.
  5. Now continue if you see the connection status.
  6. In case you see the status off or disabled or disconnected, your HP Officejet 6600 printer is not connected to your network.
  7. Now, attach your printer again to the network to carry on.
  8. In case you need some extra help, look for the user guide for your printer model on HP Officejet 6600 website.
  9. You can also make use of the wireless setup wizard, present in the control panel of your HP Officejet 6600 printer if it is accessible.
  10. Now, look for the IP address, default gateway, and subnet mask based on your network type, mentioned in the printout of the network report.
  11. If you see separate numbers for IPv4 and IPv6 then look in the IP section.
  12. Now, from the PC device connected to your network, look for the URL for the embedded web server in the printed report.
  13. You may use another internet browser if the webpage is shown barely.
  14. Now, you have to tap on the Network or Networking tab.
  15. Then, open the page or section for your network type i.e. wired or wireless.
  16. When you see the ‘suggest manual IP address button’ automatically.
  17. Then select the Manual IP button.
  18. In case you don’t see the button, enter the IP address, subnet mask, and default gateway from the printed report.
  19. Make sure you note down the fresh numbers so you can add other printers to the network manually in the future. 

 

Wrapping Up!

 

We have mentioned some easy steps to establish a manual connection between the network and your printer. So, from now on whenever you face any issue with the network connection the HP Officejet 6600 troubleshooting guide will help you out. Still, if you find any more issues, contact us on our toll-free number and sort the issue in no time.

Comments

Popular posts from this blog

How do I Connect My HP Officejet Pro 8025 to WiFi?

Looking For a WPS Pin on HP Printer?

How to Resolve HP Officejet 3830 Not Printing Color Issue?