How Do I Install HP Deskjet 3510 via a Wireless Connection for Mac Device?

Have you purchased a new HP Deskjet 3510 printer? Do you want to take the printout wirelessly from your printer? Don’t know how to take out the printout from your Mac device? Well, to enjoy the printing operation from your Mac device, you need to complete the HP Deskjet 3510 wireless setup. With this printer, you can take the printout by both wired or wireless methods. The wireless printing operations allow the users to give the print command from anywhere after connecting your device with the WiFi and your printer. Most of the users complain that they are facing difficulty in wireless connection setup for the Mac devices. If you want to get the answer to these questions then scroll down and know the simple steps to do the same. Let’s get started without any further delay.

HP Deskjet 3510 wireless setup


Instructions for HP Deskjet 3510 Wireless Setup

If you have purchased a new HP Deskjet 3510 printer and want to connect it with your Mac device to print the documents then go through the below-mentioned steps. The below steps will help you in the hp Deskjet 3510 wireless setup on your Mac device:

Step 1: If you are using the wireless network on your HP Deskjet 3510 printer then make sure that your device has a high-speed internet connection.

Step 2: Make sure to turn on your computer and router.

Step 3: Check whether your printer should have enough papers in the input paper tray or not. In case, there are no papers then insert a bunch of papers into the input tray. 

Step 4: Also, check that there should be enough ink in the ink cartridge of your printer.

Step 5: If any of the wired connection is established then remove the USB cable.

Step 6: Ensure that your HP Deskjet 3510 printer is turned on. Make sure to place your computer and router nearer to each other for better accessibility. 

Step 7: Press the power button to start your printer and wait for some time until the LED power light on your device becomes stable.

Step 8: If the WiFi light does not blink on your device then you need to tap on the wireless option and cancel button at the same time for some seconds. 

Step 9: Follow the instructions mentioned on your screen to install the software.

Step 10: To complete the software setup process, use the HP auto wireless option. 

Step 11: Next, you need to download and install the printer driver into your system. 

Step 12: For printer driver installation, go to the setup webpage and then tap on the download button and launch the HP Easy Start.

Step 13: Click on the set up my HP option and tap on Agree button.

Step 14: Check whether the LED light is blinking or not on the printer control panel or not.

Step 15: Select your printer under the connect screen. Tap on the Continue button.

Step 16: You need to enter all the essential details and tap on the Join option.

Step 17: Next, you need to allow the HP Easy Start request to access the wireless network. Tap on Allow button.

Step 18: Tap on the Add printer to create a queue and begin the printing operation. 


Congrats! With the above steps, you can complete the HP Deskjet 3510 wireless setup on your device successfully without any difficulty. 


Comments

Popular posts from this blog

How do I connect my HP Deskjet 3510 to my Mac wirelessly?

How to Resolve HP Printer Stuck on Initializing Issue?

Why Did HP Print Job Stuck In Queue? How To Fix?